- Concrete Mixing Machine
- Concrete Tilting Mixer
- Reverse Drum Mixer
- Concrete Pan Mixer
- Twin Shaft Concrete Mixer
- Concrete Batching Plant
- Stationary Concrete Batching Plant
- Containerized Concrete Batching Plants
- Mini Mobile Concrete Plant
- Construction and Engineering Equipment
- Site Dumper
- Loader
- Tower Crane
- Construction Hoist
- Building Hoist
- Concrete Mixer Pump
- Wet Mix Shotcrete Equipment
- Block Making Machine
- Mobile Hollow Block Making Machine
- Stationary Block Moulding Machine
- Construction Compacting Machinery
- Road Roller
- Plate Compactors
- Tamper Rammer
- Concrete Vibrating Pokers
- Concrete Finishing Machine
- Automatic Concrete Wall Plastering Machine
- Mini Construction Machinery
- Steel Bar Cutter Machine
- Steel Bar Bender Machine
- Steel Spiral Bender
- Steel Bar Bender and Cutter
2 Wheel Drive Site Dumper
Site Dumper SD10
| Model | SD10-9D | SD10-9DA |
| Picture |
|
|
| Payload | 1000kg | |
| Diesel Engine | Single cylinder, Water-cooling system with radiator | |
| Rated Power | 12 hp/2200 rpm | |
| Water capacity | 317 ltr (11.2 cuf) | |
| Struck capacity | 467 ltr (16.5 cuf) | |
| Heaped capacity | 765 ltr (27 cuf) | |
| Min.Out turning circle Radius | 4 m | |
| Min. Ground Clearance | 200mm | |
| Discharging Height |
|
|
| Tipping System | Mechanic | |
| Engine starting | Manual | Manual and Electric |
| Electric Battery | No | 12 V, 75 amp. |
| Driver awning | No | Yes |
| Road speed | 5.8 ~23 km/h | |
| Reverse speed | 4.7 km/h | |
| Transmission | 3 forward & 1 reverse gear | |
| Chassis | Rigid frame | |
| Driving axle | 4×2 | |
| Clutch | Constant-contact, Single disc, dry clutch | |
| Dimension | 2650×1600×1450mm | 2650×1600×2074mm |
Site Dumper SD10-13DH
| Model | SD10-13DH |
| Picture |
|
| Payload | 1000kg |
| Diesel Engine | Single cylinder, Water-cooling system with radiator |
| Rated Power | 18 hp/2200 rpm |
| Water capacity | 317 ltr (11.2 cuf) |
| Struck capacity | 467 ltr (16.5 cuf) |
| Heaped capacity | 765 ltr (27 cuf) |
| Min.Out turning circle Radius | 4 m |
| Min. Ground Clearance | 200mm |
| Discharging Height | 1650mm |
| Tipping System | Hydraulic |
| Engine starting | Manual and Electric |
| Electric Battery | 12 V, 75 amp. |
| Driver awning | Yes |
| Road speed | 5.8 ~23 km/h |
| Reverse speed | 4.7 km/h |
| Transmission | 4 forward & 1 reverse gear |
| Chassis | Articulated Frame |
| Driving axle | 4×2 |
| Clutch | Constant-contact, Single disc, dry clutch |
| Dimension | 3200×1600×1700mm |
Related Products
- Block Making LineBased on foreign advanced technology and processes, our company developed the largest mobile hydraulic brick making machine. This machine has some advantages ...
- Surface Finishing ScreedConcrete vibratory screed machine is used to smooth concrete and cement in a small area and to make the sand and cement compact with the 1-5m aluminum magnesium alloy blade. ...
- Semi-Automatic/ Automatic Block Production Line QT12-15Automatic block production line consists of two systems: batching and mixing system, block forming and stack system. All equipments needed for the line are as follows: PL1600 batching machine, JS1000 compulsive mixer, QT12-15 block making machine, and stack machine. ...
- Frame Truss ScreedConcrete frame truss screed is the new type of construction equipment used to compact concrete surface of highway, plant and square. ...